Product Description

Create Die Mold

 

Create a die mold is the first step for the metal forging process, it is critical and essential step for the die mold forging process.

 

We have a die mold maker who had been working with us for near 20 years, with rich experience, who can design the mold according to customers’ drawings, samples very quickly and with very high quality.

 

Material Cutting and Heating

Material Cutting and Heating

 

Base on the drawings or samples, our engineers will calculate the bar material diameter and length we need, then we will select the correct bar material and cut it in suitable billets.

 

The billets will be sent to the high frequency furnace for hearting to about 1000°C, then start the press.

 

Press

Press

 

The heated billet with 1000° C will be put at the middle of the  dies, close the dies, the material will be shaped as the customers requirement. When open the dies, we get a raw parts with the fin around.

 

 

 

Cutting the Fin

Cutting the Fin

 

The raw parts with the fin will put in a cutting mold to remove the fin, after the fin removed, we get the raw forgings, the forging process is completely.

 

 

 

Heating Treatment

Heating Treatment

 

To get better strength or machining hardness, eliminate forging stress and improve metal cutting performance. we need put the forging in heat treatment furnace. Heat the parts near or above its critical temperature, held for a certain time, then cooling the metal in some medium like air, water or molten salts.

 

The hot forging process includes annealing, case hardening, tempering, normalizing and quenching, nitriding, cyaniding etc.

 

Sand Blasting

Sand Blasting

 

To remove the oxide layer of the forging and get a uniformed surface, we will place the parts in sand blast machine. After sand blasting, the surface is quite uniform.

 

Machining

Machining

 

To get accurate dimensions, the machining process is needed. In my factory, with more than 40set machining, we can machine the forgings in turning, drilling, milling, grinding, that means, you just need provide the drawings or samples, we will make finished parts according to your request.

 

 

 

Quality Inspection

Quality Inspection

 

Every parts in my factory must be inspected the quality before leading to my customers. This is very important to process, we have various inspection tools and experienced inspectors in my factory. The defected parts is not allowed to ship to any customer.

 

Packing

Packing

 

We are experienced in export package, we will follow customers request to pack the parts, the plywood box or carton, pallets all available.